Service area
Steel detailing across the San Francisco Bay Area
From our base in Hayward we work across the East Bay, the Peninsula, San Francisco and the South Bay. Here is what steel detailing looks like in each city we serve.
01 · 37.6688°N 122.0808°W
EDF Works headquarters
Steel shop drawings & detailing in Hayward
Hayward is our home base. It sits in the middle of the East Bay shoreline, between Oakland to the north and Fremont to the south, with the San Mateo Bridge running straight across to the Peninsula. That central position is a practical advantage: site questions anywhere on this map are a short drive away.
Hayward's building stock ranges from hillside homes to large warehouse and light industrial buildings, so the steel we detail here covers the full range: exterior stairs and railings for houses, canopies and moment frames for commercial buildings, and mezzanines inside industrial space.
Services we provide in Hayward
- Project management
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
02 · 37.4530°N 122.1817°W
About 16 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Menlo Park
In Menlo Park we have detailed an exterior steel stair with cable guardrails, a good example of steel that is both structure and architecture. When steel is exposed, connection details, weld locations and the run of the railing cables is visible, so the shop drawings have to capture the architect's intent as well as the engineer's.
Railings also have to meet code requirements for height and openings. We check those against the drawings while we model, so the review set raises fewer questions and the steel that arrives on site is the steel that was designed.
Services we provide in Menlo Park
- 3D modeling
- Shop drawings
- Fabrication drawings
- Structural & architectural drawings
03 · 37.5600°N 122.3980°W
About 19 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Hillsborough
Hillsborough is almost entirely residential, with large homes on sloped and wooded lots. Steel here is often custom: exterior stairs that follow a grade, cable or bar railings along terraces and decks, and canopies designed as part of the architecture.
Slopes and custom geometry make dimension control important. We model stairs and railings in 3D, check rise, run and opening sizes against the drawings, and call out the field dimensions that must be confirmed before fabrication.
Services we provide in Hillsborough
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
04 · 37.5841°N 122.3661°W
About 17 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Burlingame
Burlingame mixes established residential neighborhoods with a busy commercial downtown. On the residential side that means stairs, railings and canopies that have to look right as well as work; on the commercial side, steel that coordinates with storefronts, finishes and other trades.
For both, we start with a 3D model, check how each connection meets the architecture, and then produce shop and fabrication drawings with the finish and coating notes the shop needs.
Services we provide in Burlingame
- 3D modeling
- Shop drawings
- Fabrication drawings
- Estimating
05 · 37.7749°N 122.4194°W
About 20 miles from our Hayward base (straight line)
Steel shop drawings & detailing in San Francisco
San Francisco sites are tight. Narrow lots, steep streets and limited staging mean steel often has to arrive in pieces that fit through a side yard or up a stairwell, and go together in a specific order. Erection drawings that show piece sizes, marks and sequence make a real difference here.
Moment frames are a common San Francisco scope, along with stairs, railings and canopies. We detail connections carefully, coordinate the frame with the surrounding architecture, and keep revisions organized through the review cycle with the design team.
Services we provide in San Francisco
- Erection drawings
- Shop drawings
- Fabrication drawings
- 3D modeling
- Project management
06 · 37.8044°N 122.2712°W
About 14 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Oakland
Oakland work often means new steel meeting existing buildings. Older structures rarely match their original drawings exactly, so good shop drawings start by separating what is known from what needs field verification, and by flagging those dimensions before the shop cuts anything.
Typical Oakland scopes include canopies, moment frames, exterior steel and stairs and railings. For each, we model the steel in 3D, coordinate it with the architectural and structural drawings, and produce shop, fabrication and erection drawings the whole team can work from.
Services we provide in Oakland
- Shop drawings
- Fabrication drawings
- Erection drawings
- 3D modeling
- BIM coordination
07 · 37.5485°N 121.9886°W
About 10 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Fremont
Fremont has a large base of industrial and commercial buildings alongside its residential neighborhoods. Inside industrial space, mezzanines are a common steel scope: columns, beams, decking, guardrails and an access stair, all fitted to an existing slab and building.
We detail mezzanines and moment frames with base plates, connections and anchors spelled out, coordinate them with the existing structure and equipment layouts provided by the team, and produce erection drawings that make installation inside a working building straightforward.
Services we provide in Fremont
- Estimating
- 3D modeling
- Shop drawings
- Erection drawings
08 · 37.3382°N 121.8863°W
About 25 miles from our Hayward base (straight line)
Steel shop drawings & detailing in San Jose
San Jose is the largest city in the Bay Area, with downtown, commercial, industrial and residential work all in play. Larger projects mean larger teams, and that is where BIM coordination earns its keep: the steel model is checked against architectural, structural and MEP models before drawings are released.
Typical San Jose scopes include moment frames, mezzanines, canopies and exterior steel. We provide estimating, 3D modeling, coordination and the full set of shop, fabrication and erection drawings.
Services we provide in San Jose
- Estimating
- 3D modeling
- BIM coordination
- Shop drawings
- Fabrication drawings
- Erection drawings
03 · 37.4613°N 122.1975°W
About 16 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Atherton
Atherton is in the Peninsula, about 16 miles from our Hayward office. Recent steel we have detailed here: structural staircase with landings, interior steel stair and guardrails, residence, garage and ADU structural steel and structural steel columns.
Peninsula projects are mostly custom homes and remodels on tight or sloped lots, with some commercial work. We model the steel in 3D, coordinate it with the wood framing and concrete, and issue shop and erection drawings the fabricator and crew can build from without guessing.
Services we provide in Atherton
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
07 · 37.3861°N 122.0839°W
About 20 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Mountain View
Mountain View is in the South Bay, about 20 miles from our Hayward office. Recent steel we have detailed here: pool enclosure steel fence and gates, steel gates and guardrail and steel gate.
South Bay work ranges from hillside homes to commercial buildings. We take off the steel for estimating, model it in 3D and produce shop, fabrication and erection drawings, checking every opening, elevation and connection against the architectural and structural sets.
Services we provide in Mountain View
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
08 · 37.3852°N 122.1141°W
About 20 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Los Altos
Los Altos is in the South Bay, about 20 miles from our Hayward office. Recent steel we have detailed here: new roof framing over a trash enclosure, hSS steel frame and structural steel beams and columns.
South Bay work ranges from hillside homes to commercial buildings. We take off the steel for estimating, model it in 3D and produce shop, fabrication and erection drawings, checking every opening, elevation and connection against the architectural and structural sets.
Services we provide in Los Altos
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
10 · 37.5072°N 122.2605°W
About 15 miles from our Hayward base (straight line)
Steel shop drawings & detailing in San Carlos
San Carlos is in the Peninsula, about 15 miles from our Hayward office. Recent steel we have detailed here: main-house structural steel frame and deck HSS steel columns.
Peninsula projects are mostly custom homes and remodels on tight or sloped lots, with some commercial work. We model the steel in 3D, coordinate it with the wood framing and concrete, and issue shop and erection drawings the fabricator and crew can build from without guessing.
Services we provide in San Carlos
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
11 · 37.8771°N 122.1797°W
About 15 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Orinda
Orinda is in the East Bay, about 15 miles from our Hayward office. Recent steel we have detailed here: hillside deck rebuild on galvanized steel frames.
East Bay hills mean steep lots, decks and frames that step with the grade. We model the steel to the real levels on the structural set, call out the field dimensions to verify, and issue shop and erection drawings that show exactly where each piece lands.
Services we provide in Orinda
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
12 · 37.8735°N 122.4566°W
About 25 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Tiburon
Tiburon is in the North Bay, about 25 miles from our Hayward office. Recent steel we have detailed here: cable guardrails for two decks, a retaining wall and garden steps.
Waterfront and hillside homes here call for clean, durable railings and exterior steel. We model the runs in 3D, coordinate post locations with the decks and walls, and detail every connection for the shop.
Services we provide in Tiburon
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
13 · 37.2363°N 121.9927°W
About 30 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Monte Sereno
Monte Sereno is in the South Bay, about 30 miles from our Hayward office. Recent steel we have detailed here: pool pavilion and walkway arbor steel, with gates and fencing.
South Bay work ranges from hillside homes to commercial buildings. We take off the steel for estimating, model it in 3D and produce shop, fabrication and erection drawings, checking every opening, elevation and connection against the architectural and structural sets.
Services we provide in Monte Sereno
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
14 · 37.4419°N 122.1430°W
About 16 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Palo Alto
Palo Alto is in the Peninsula, about 16 miles from our Hayward office. Recent steel we have detailed here: exterior stair and guardrails, shopping-center steel and residential beams and posts.
Peninsula projects are mostly custom homes and remodels on tight or sloped lots, with some commercial work. We model the steel in 3D, coordinate it with the wood framing and concrete, and issue shop and erection drawings the fabricator and crew can build from without guessing.
Services we provide in Palo Alto
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
15 · 37.9101°N 122.0652°W
About 17 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Walnut Creek
Walnut Creek is in the East Bay, about 17 miles from our Hayward office. Recent steel we have detailed here: main-house structural steel, commercial steel, indoor trampoline park and commercial steel, bank branch.
East Bay hills mean steep lots, decks and frames that step with the grade. We model the steel to the real levels on the structural set, call out the field dimensions to verify, and issue shop and erection drawings that show exactly where each piece lands.
Services we provide in Walnut Creek
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
- BIM coordination
16 · 37.2638°N 122.0230°W
About 28 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Saratoga
Saratoga is in the South Bay, about 28 miles from our Hayward office. Recent steel we have detailed here: residential steel columns and beams, hSS outriggers and beams and stair railings.
South Bay work ranges from hillside homes to commercial buildings. We take off the steel for estimating, model it in 3D and produce shop, fabrication and erection drawings, checking every opening, elevation and connection against the architectural and structural sets.
Services we provide in Saratoga
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
17 · 37.4852°N 122.2364°W
About 15 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Redwood City
Redwood City is in the Peninsula, about 15 miles from our Hayward office. Recent steel we have detailed here: hotel structural steel and residential beams and posts.
Peninsula projects are mostly custom homes and remodels on tight or sloped lots, with some commercial work. We model the steel in 3D, coordinate it with the wood framing and concrete, and issue shop and erection drawings the fabricator and crew can build from without guessing.
Services we provide in Redwood City
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
- BIM coordination
19 · 37.8716°N 122.2727°W
About 17 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Berkeley
Berkeley is in the East Bay, about 17 miles from our Hayward office. Recent steel we have detailed here: fire station remodel steel and stair and balcony remodel.
East Bay hills mean steep lots, decks and frames that step with the grade. We model the steel to the real levels on the structural set, call out the field dimensions to verify, and issue shop and erection drawings that show exactly where each piece lands.
Services we provide in Berkeley
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
20 · 37.2358°N 121.9624°W
About 31 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Los Gatos
Los Gatos is in the South Bay, about 31 miles from our Hayward office. Recent steel we have detailed here: steel support for a wood deck and residential structural steel.
South Bay work ranges from hillside homes to commercial buildings. We take off the steel for estimating, model it in 3D and produce shop, fabrication and erection drawings, checking every opening, elevation and connection against the architectural and structural sets.
Services we provide in Los Gatos
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
21 · 37.5934°N 122.0191°W
About 6 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Union City
Union City is in the East Bay, about 6 miles from our Hayward office. Recent steel we have detailed here: residential steel beams.
East Bay hills mean steep lots, decks and frames that step with the grade. We model the steel to the real levels on the structural set, call out the field dimensions to verify, and issue shop and erection drawings that show exactly where each piece lands.
Services we provide in Union City
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
23 · 37.7652°N 122.2416°W
About 11 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Alameda
Alameda is in the East Bay, about 11 miles from our Hayward office. Recent steel we have detailed here: residential steel beams and posts.
East Bay hills mean steep lots, decks and frames that step with the grade. We model the steel to the real levels on the structural set, call out the field dimensions to verify, and issue shop and erection drawings that show exactly where each piece lands.
Services we provide in Alameda
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
24 · 37.8216°N 121.9999°W
About 11 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Danville
Danville is in the East Bay, about 11 miles from our Hayward office. Recent steel we have detailed here: residential structural steel.
East Bay hills mean steep lots, decks and frames that step with the grade. We model the steel to the real levels on the structural set, call out the field dimensions to verify, and issue shop and erection drawings that show exactly where each piece lands.
Services we provide in Danville
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
25 · 37.5585°N 122.2711°W
About 13 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Foster City
Foster City is in the Peninsula, about 13 miles from our Hayward office. Recent steel we have detailed here: residential steel beams.
Peninsula projects are mostly custom homes and remodels on tight or sloped lots, with some commercial work. We model the steel in 3D, coordinate it with the wood framing and concrete, and issue shop and erection drawings the fabricator and crew can build from without guessing.
Services we provide in Foster City
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
26 · 37.5202°N 122.2758°W
About 15 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Belmont
Belmont is in the Peninsula, about 15 miles from our Hayward office. Recent steel we have detailed here: residential steel beams.
Peninsula projects are mostly custom homes and remodels on tight or sloped lots, with some commercial work. We model the steel in 3D, coordinate it with the wood framing and concrete, and issue shop and erection drawings the fabricator and crew can build from without guessing.
Services we provide in Belmont
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
27 · 37.8858°N 122.1180°W
About 15 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Lafayette
Lafayette is in the East Bay, about 15 miles from our Hayward office. Recent steel we have detailed here: new home structural steel.
East Bay hills mean steep lots, decks and frames that step with the grade. We model the steel to the real levels on the structural set, call out the field dimensions to verify, and issue shop and erection drawings that show exactly where each piece lands.
Services we provide in Lafayette
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
28 · 37.4323°N 121.8996°W
About 19 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Milpitas
Milpitas is in the South Bay, about 19 miles from our Hayward office. Recent steel we have detailed here: commercial structural steel.
South Bay work ranges from hillside homes to commercial buildings. We take off the steel for estimating, model it in 3D and produce shop, fabrication and erection drawings, checking every opening, elevation and connection against the architectural and structural sets.
Services we provide in Milpitas
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
- BIM coordination
29 · 37.3688°N 122.0363°W
About 21 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Sunnyvale
Sunnyvale is in the South Bay, about 21 miles from our Hayward office. Recent steel we have detailed here: residential steel beams.
South Bay work ranges from hillside homes to commercial buildings. We take off the steel for estimating, model it in 3D and produce shop, fabrication and erection drawings, checking every opening, elevation and connection against the architectural and structural sets.
Services we provide in Sunnyvale
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
30 · 37.3841°N 122.2183°W
About 21 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Portola Valley
Portola Valley is in the Peninsula, about 21 miles from our Hayward office. Recent steel we have detailed here: residential structural steel.
Peninsula projects are mostly custom homes and remodels on tight or sloped lots, with some commercial work. We model the steel in 3D, coordinate it with the wood framing and concrete, and issue shop and erection drawings the fabricator and crew can build from without guessing.
Services we provide in Portola Valley
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
Discuss a Portola Valley projectSee Portola Valley on the map
31 · 37.3541°N 121.9552°W
About 23 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Santa Clara
Santa Clara is in the South Bay, about 23 miles from our Hayward office. Recent steel we have detailed here: residential structural steel.
South Bay work ranges from hillside homes to commercial buildings. We take off the steel for estimating, model it in 3D and produce shop, fabrication and erection drawings, checking every opening, elevation and connection against the architectural and structural sets.
Services we provide in Santa Clara
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
32 · 37.6138°N 122.4869°W
About 23 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Pacifica
Pacifica is on the coast, about 23 miles from our Hayward office. Recent steel we have detailed here: hSS steel columns.
Coastal homes need steel detailed with exposure in mind. We model the members, plates and anchors in 3D and issue clear shop drawings for review and fabrication.
Services we provide in Pacifica
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
33 · 37.2872°N 121.9500°W
About 27 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Campbell
Campbell is in the South Bay, about 27 miles from our Hayward office. Recent steel we have detailed here: steel canopy.
South Bay work ranges from hillside homes to commercial buildings. We take off the steel for estimating, model it in 3D and produce shop, fabrication and erection drawings, checking every opening, elevation and connection against the architectural and structural sets.
Services we provide in Campbell
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
18 · 36.9741°N 122.0308°W
About 48 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Santa Cruz
Santa Cruz is on the coast, about 48 miles from our Hayward office. Recent steel we have detailed here: apartment building transfer steel and stair handrail.
Coastal homes need steel detailed with exposure in mind. We model the members, plates and anchors in 3D and issue clear shop drawings for review and fabrication.
Services we provide in Santa Cruz
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
24 · 37.1305°N 121.6544°W
About 44 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Morgan Hill
Morgan Hill is in the South Bay, about 44 miles from our Hayward office. Recent steel we have detailed here: steel bridge and cable guardrails.
South Bay work ranges from hillside homes to commercial buildings. We take off the steel for estimating, model it in 3D and produce shop, fabrication and erection drawings, checking every opening, elevation and connection against the architectural and structural sets.
Services we provide in Morgan Hill
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
36 · 38.2975°N 122.2869°W
About 45 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Napa
Napa is in the North Bay, about 45 miles from our Hayward office. Recent steel we have detailed here: cable guardrail and fence.
Waterfront and hillside homes here call for clean, durable railings and exterior steel. We model the runs in 3D, coordinate post locations with the decks and walls, and detail every connection for the shop.
Services we provide in Napa
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
37 · 37.0855°N 121.6105°W
About 48 miles from our Hayward base (straight line)
Steel shop drawings & detailing in San Martin
San Martin is in the South Bay, about 48 miles from our Hayward office. Recent steel we have detailed here: structural steel columns.
South Bay work ranges from hillside homes to commercial buildings. We take off the steel for estimating, model it in 3D and produce shop, fabrication and erection drawings, checking every opening, elevation and connection against the architectural and structural sets.
Services we provide in San Martin
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
38 · 38.2324°N 122.6367°W
About 49 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Petaluma
Petaluma is in the North Bay, about 49 miles from our Hayward office. Recent steel we have detailed here: angle steel panel frames.
Waterfront and hillside homes here call for clean, durable railings and exterior steel. We model the runs in 3D, coordinate post locations with the decks and walls, and detail every connection for the shop.
Services we provide in Petaluma
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
39 · 37.0058°N 121.5683°W
About 54 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Gilroy
Gilroy is in the South Bay, about 54 miles from our Hayward office. Recent steel we have detailed here: steel canopy.
South Bay work ranges from hillside homes to commercial buildings. We take off the steel for estimating, model it in 3D and produce shop, fabrication and erection drawings, checking every opening, elevation and connection against the architectural and structural sets.
Services we provide in Gilroy
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
40 · 38.4455°N 121.8233°W
About 55 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Dixon
Dixon is in the North Bay, about 55 miles from our Hayward office. Recent steel we have detailed here: retail building moment frames.
Waterfront and hillside homes here call for clean, durable railings and exterior steel. We model the runs in 3D, coordinate post locations with the decks and walls, and detail every connection for the shop.
Services we provide in Dixon
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
41 · 36.5725°N 121.9455°W
About 76 miles from our Hayward base (straight line)
Steel shop drawings & detailing in Pebble Beach
Pebble Beach is on the coast, about 76 miles from our Hayward office. Recent steel we have detailed here: residential steel.
Coastal homes need steel detailed with exposure in mind. We model the members, plates and anchors in 3D and issue clear shop drawings for review and fabrication.
Services we provide in Pebble Beach
- Estimating
- 3D modeling
- Shop drawings
- Fabrication drawings
- Erection drawings
Working with us outside these cities
Do you only work in the cities listed?
These are cities where we have worked. Our base in Hayward is central to the whole Bay Area, so if your project is nearby, ask us.
What do you need to start?
The current architectural and structural drawings, the steel scope you need detailed, and your schedule. Specifications and any existing-condition information help too.
Do you work for fabricators, contractors or owners?
Our drawings serve the people who build the steel and the people who review it. Tell us your role and the scope, and we will explain how we would fit into the project.
Hayward, CA · Bay Area wide
Have drawings for a steel package?
Send us the architectural and structural set. We will look at the scope and get back to you about detailing, modeling and estimating.